a life of felt

Posts Tagged ‘bird’

Something a bit different?

Tuesday, May 3rd, 2011

This seems like something different to what I normally produce but perhaps you won’t think so. Inspired by the glass and rusty nail ring I made two days ago, I thought it time to get on and use this rusty heart which has been awaiting my attention for Oh so long!

Originally it was intended to hold fat balls for the birds but the wind was always ripping it off the tree, I tired of hunting for it in the shrubs and set it aside to do something with. It’s been set aside for about a year but yesterday was the day I had an idea. I’ve lots of felt balls (waiting!), a rusty bell garland (also waiting! it was a new year bargain), a surplus bird (waiting! it was a sample from a commission), some newly died rug yarn and some leftover Teeswater curls.

I cut up the garland and hung it from the heart doubling the overall length. Somehow, just doing that makes it feel more of a statement art piece. Rust is orange / brown in colour so looks perfect with blue and I had some turquoise blue rug yarn. Silently thanking Yvonne for the suggestion to put some weaving in the heart, I used the rug yarn to warp up the shoulders and then wove the Teeswater curls through it. A few curls were tied on but I haven’t made the weaving solid as I want it to have holes and texture. Not sure if I should add some yarns through here, too just to give even more texture – opinions?

The bird was way too brown so I sat and couched on a fancy yarn in turquoise in my favourite flowing scroll shapes. Blue cap, throat and eyes completed the bird which I then needed to attach to the heart. The bird is too solid to push the spike into so I covered the spike base with an unfinished brooch layer (yes, it was waiting!), glued on some balls to cover the spike and glued the bird to the balls. Sort of looks like it’s on a nest of blue eggs doesn’t it?

I attached three blue balls to the bells below the heart and was very happy to find a turquoise ball the perfect size for the hole at the top. Sometimes, it’s just meant to be. I’d like to put this in the garden but we’re in a very windy spot and it just wouldn’t survive so for now it will hang in the dining room as soon as I get a ceiling hook.

3D Figures

Thursday, October 14th, 2010

I don’t do a lot of needle felting as it tends to set off my repetitive strain injury which is never helped by the fact that I get obsessional about needle felting. I know it can be done over several days but I always end up needling away for hours because I can’t bear to stop before it’s finished. My latest project is probably my best and I thought I’d share a few examples with you.

The bird shapes are nice to create but I most enjoyed needling the pattern onto the black one – that was fun. I made Neptune ages ago and thought he needed a mate so here’s my new mermaid.

The size isn’t right is it? perhaps I should have looked at Neptune before I began the mermaid but never mind she has a certain charm. Overall I think I’m most pleased with my latest project.

She’s been named the old crone by the family and we think she’s lovely. I couldn’t get the hands as I wanted them so I gave her an apple and a stick to take attention elsewhere. Methinks she needs some company – any ideas? It’s much easier to do features on larger dolls. Can you guess what this doll is based around? – a leftover yarn cone. Good use of materials eh? For anyone fancying a go at a needle felted figure I have a workshop on Saturday 6th November and there are still spaces left.

Reject? – Not any more

Sunday, April 4th, 2010

A little while ago I was busy making felt Marsh Harriers for a commission. The black bird below was a prototype to allow me to assess the shape and how well the finished item would stand up to the proposed educational use.

I thought it seemed a shame to hide it at the back of a cupboard and had the bright idea of recycling it into a decorated bird. As I’d already wet felted it there was no chance of adding more fibres on that way so I have been busy with needlefelting.

I’ve really enjoyed playing with it. The lines of pink I adore and over all it has something of an indian influence I think. When I have more time it needs to be mounted or hung so it can be admired from all angles. There are still two more rejects to play with but it may be some time before I get to them.

Just the rejects

Thursday, March 11th, 2010

Sometimes I seem to have a sieve for a memory. Today, I delivered the male and female Marsh Harriers, which were well received by RSPB Leighton Moss and which should be out and about in schools next week But, I FORGOT to take photos of the finished items! I have asked the nice people at the RSPB to send some to me which I hope to show you next week. What I can show you is shots of the two birds which I rejected, mainly because they’re bigger than the size I’d been asked to make.

reject-003

reject-002reject-005

You’ll have to excuse my fingers in the shots I wasn’t sure how else to show them and take photos at the same time. As they’re actually quite good birds I think perhaps I should try and recycle them by changing them into ‘arty’ Marsh Harriers e.g. adapting tails, putting a crest on the head, covering it in circles. So if you have any suggestions of how I mght do that please post your comments here. I’ll choose a suggestion and see how far I can change the bird.

Obsessed with birds

Wednesday, March 10th, 2010

I’ve been working away on the marsh harriers for the last few days and I’m defnitely getting obsessed. I made the prototype in black to help me see the shape and practice my technique. Then I did it in browns with wire in the wings. If that wasn’t enough I’ve done the female twice more since then. Nothing wrong with the finished items I just couldn’t get the size small enough.

On Saturday, I started the birds again. One of my main worries has been the shade of brown to use, every image I look at seems to show it differently. But, at long last, I decided on the shades and got on with it. I cut the wires, blended the colours and needlefelted the shape ready for wet felting. Yesterday I wet felted and finalised the shape of the birds and left them to dry.

This morning I should be attaching them to gloves ready for presenting tomorrow. So, do you think I’m doing that? NO. Instead I’m needlefelting the male some more as I’m not happy with the head shape. I really hope this works because I don’t want to start again. Any more practice runs and I’ll have a flock. Plus, it really does need to be finished and dried today or I’m up the creek without a paddle. Wish me luck, I’ll show you the pictures later.

Harrier’s Progress

Wednesday, March 3rd, 2010

I decided to have another go at a Marsh Harrier model with wire in the wings. There was no suitable wire in the house so I went to the local florists and chose from within their stock. It’s not a covered wire so the fibres might have slipped off it whilst I was trying to wrap them around. To counteract this I covered the wire with masking tape after twisting them together, it gives the fibres a little grip.

bird 001

I used a mix of norwegian and merino fibres. the norwegian is very easy to needlefelt and the merino wet felts well. Ths may be the best combination of fibres for me to use as I intend to use both dry and wet felting techniques. Needlefelting allows me to sculpt the shape and place the markings exactly whilst wet felting will consolidate and strengthen the felt.

bird6

The wire in the wings has worked very well and shows no signs of piercing the felt, which had been a concern. I’ve improved the shape and the size is right. I need to fatten the body out and shape the beak more but I believe the next bird might be a finished article.

Another felt bird!

Saturday, February 27th, 2010

I don’t know what it is about me and felt birds, remember the Curlew Diaries?, but I now have two more felt birds to make. This time it’s a commission to produce a pair of birds, Marsh Harriers to be exact. They’ll be used as educational aids and I need to ensure they’re the right colourations for the male and female Marsh Harriers. Fortunately they’re not full size, they’re about 1/3 actual size with a wingspan of 14″ (35cm). During the breading season the Marsh Harriers perform an aerial dance and the felt birds I make will be attached to gloves so that the dance can be replicated.

It’s a different technique to felting around a mould as these birds will be solid wool throughout. Some years ago I made a white fantasy bird i.e. it doesn’t look like a specific breed, by wet modelling the fibres. Beside it you can see my first attempt at a Masrh Harrier.

bird-002bird-004bird-003bird-005

There’s quite a lot wrong with the prototype but the angle of the wings and overall size is quite good. The more observant amongst you will have noticed that the bird is black and Marsh Harriers are not. I made it in black because it allowed me to focus on technique and enables me to see the shape without being distracted by colouration. It was also a good way of practising wet modelling.

One of my concerns over the finished birds is how strong the wings will be. They will need to retain the wing shape in flight and not go droopy. The prototype has poven that the wings will need reinforcement in the form of a hidden wire. The next step is to make a second model wired and with some colour and I’ll show you the results here.